Basic Tools Needed for a New Garage Workshop

Socket Set Advice

Basic Tools Needed for a New Garage Workshop

If you are planning to set up your own garage workshop, you have to be familiar with all the tools you need for all your automotive projects. Whether or you are just maintaining your own car or are going to repair cars for a living, there are a few things that you need to buy in order to start. You cannot just bring your regular home DIY tools to work with in your garage because cars and jeeps have particular parts that need particular tools.

Of course, nothing will assure a new mechanic than knowing he has the right tools to begin and finish a project. In this article, you are going to learn what a socket set, pliers, and wire cutters is, as well as five more tools. Aside from this, you will also discover how to use these tools.

1.  Socket Set

Now, what is a socket set? This is definitely one of the most important set of tools you will need when you are working on your car. They are used for installing or removing bolts and other types of fasteners found in cars.

The reason why you need to buy a whole socket set is that socket sets are complete and comprehensive. They come in different sizes and types, providing any possible socket you might need to complete your work.

Aside from this, they may also include extensions, universal joints, and ratchets, which can be useful in certain situations.

Professional mechanics and those who own car repair shops always include both SAE and metric sizes, because these two types are commonly found in old and modern vehicles.

The SAE sockets are measured in inches sizes while the metric sizes are measured in millimeters. For heavy duty jobs, you need tougher tools such as impact sockets and impact wrenches. And for specific types of projects, you might also need bit sockets, spark plug sockets, and pass through sockets.

2.  Pliers and Wire Cutters

If you are planning to install electrical units in a vehicle (such as stereos, speakers or headlights), you will haveto use pliers of various sizes. Aside from that, you need to some wire cutters and wire strippers, too.

Of course, a pair of work gloves is also a necessity. These tools are your basic needs when you have to cut, twist or splice wires. A long nose plier can bend loops and reach awkward places. And sometimes, they can also be used for dealing with fasteners.

3.  Torque Wrench

If you already have a set of sockets, you are of course going to need a torque wrench. This tool helps set the nut to the proper torque so that it won’t shear off or be difficult to remove when you have to.

With the clicker-type torque wrench you can tighten nuts according to the proper specifications by turning the bottom handle and aligning the top part to the specified torque.

Only stop tightening when you hear two clicks. Just remember that this tool is for installing lug nuts and not for removing them.

4.  Wrench Set

Wrenches are valuable tools every mechanic needs in his tool box. They are used for installing and removing fasteners, providing leverage and torque strength.

There are different types and sizes of wrenches that you might need for any given job. That is why purchasing a set is a wise move.

This allows you to move from one bolt to another conveniently because you have so many wrenches available,thus saving time. A set often includes all shapes and sizes, such as open-ended sides and ratcheting box ends.

5.  Screwdriver Set

You may already have a screwdriver set for your house that can work with vehicles. However, you might need to expand your set.

If you do not have screwdrivers with a larger flathead or small screwdrivers for delicate electronic work, then it might betime to buy a complete set.

6.  Dead Blow Mallet

When the going gets tough and the stuck bolts get more difficult to handle, the last option is to use a dead blow mallet. You just need a few smacks and the bolts are sure to loosen. Don’t worry, mallets are covered with molded poly to protect and not damage metal surfaces.

7.  Zip Ties

One of the ways to make sure that cables and wires are away from hot and moving parts is to use zip ties. These tools are a great help in managing your workspace, keeping everything nice and tidy. This way, you will be able to work on the vehicle and see all the parts that need repairing or maintenance.

Leave a Comment:

Leave a Comment: